For cleaning companies and their crews
Every space measured, every hour calculated at your own rates.
Record areas, fixtures and panes on your phone: MesuPro calculates the areas, the product to buy and the labor hours from your own production rates. Six templates, from the janitorial bid walkthrough to post-construction and move-out cleaning.
No credit card. Cancel anytime.
More templates to try: Floor care: strip, finish and carpet Window cleaning survey Pressure washing and exterior cleaning Post-construction cleaning: site survey Move-out and rental turnover cleaning: survey


The cleaning and maintenance templates
Feet, inches, square feet or metric: your choice.
Commercial cleaning: pre-bid site walkthrough
Space by space: area by floor type, fixtures, visits per week and periodic work, for hours per week and per year.
You get: Cleanable area Liners per week Liners per year
Floor care: strip, finish and carpet
Net area by service, finish and stripper to buy, grout cleaning and sealing, labor hours and a carpet pre-inspection with photos.
You get: Net area Finish Tiled area
Window cleaning survey
Windows and panes on each side of the building, inside and outside, with the access, the height and the cleaning time.
You get: Panes Outside panes Inside panes
Pressure washing and exterior cleaning
Driveways, patios, walls and fences: area by material, method, sealer to buy and wash water.
You get: Flat surface area Sealer Wall area
Post-construction cleaning: site survey
The end of a build, space by space: area and hours by phase (rough, final, touch-up), glass, fixtures and exterior.
You get: Area to clean Inside panes Outside panes
Move-out and rental turnover cleaning: survey
Move-out, move-in or short-term rental, room by room: areas, hours at your rates, extra tasks, conditions found on arrival and linens per turnover.
You get: Floor area Per month Linens to stock
What you record on site
See the list (11)
- Each space: its type, the floor type, length and width (or the area from the plan) and the visits per week
- Restroom fixtures and dispensers, counted by space type
- Waste containers by space type, their shape and size, the liner you order and the changes per week
- Concentrated chemicals: the dilution on the label, the water mixed per visit and the size you buy
- Periodic work (carpet extraction, strip and refinish, interior glass, high dusting) and how many times a year
- For floors: the service, the coats of finish, the finish condition and a carpet pre-inspection with photos
- For tile: each area, the tile size and the joint width, the grout, its condition and the water drop test
- For windows: windows and panes on each side of the building, inside and outside, the access and the height
- For pressure washing: flat surfaces, walls and fences, the material, the method and where the wash water goes
- After construction: each space by phase (rough, final, touch-up), the glass, the fixtures and the exterior
- For a move-out or a rental: each room and its floor, its condition, the extra tasks (oven, fridge, cabinets), the conditions found on arrival with photos, and the linens per turnover
What MesuPro calculates for you
See the list (11)
- The cleanable area of each space, and the total by floor type
- Minutes per visit, hours per week and per year, from the production rate you enter
- Hours by space type, and the hours of periodic work by task
- The liner size from the container, then the liners per week and per year and the cases to order, per liner
- The concentrate per week and per year from the dilution, and the containers to order per product
- Floor finish and stripper to buy, by product, rounded up to the gallon
- The grout joint length, then the cleaner and the sealer to buy, by product
- Panes to clean outside and inside, by window type and by access, and the total time
- Areas to wash by material and cladding, and the sealer to buy by product
- After construction: the area and crew hours by phase, the hours by glass type, for the fixtures and for the exterior
- For a move-out or a rental: the area by floor, the hours from your minutes per room and per task, the linens per month and the linens to own from your par level
No rate comes filled in: production rates, minutes per fixture and product coverage are yours (or the manufacturer's label). Each template's guide cites its sources, and the report for the client shows neither your rates nor your hours.
The report, as PDF or Excel
Export a PDF for the client, without your rates or hours, or for internal use with every column. The Excel export carries the areas and hours into your pricing.

FAQ
Does MesuPro set my production rates?
No. You enter your own rates (square feet per hour, minutes per fixture). Each template's guide cites published benchmarks to help you choose them, and says which ones are only a rough guide.
Do my rates and hours show on the client report?
No. When you export, choose the client: the internal columns (rates, minutes, hours) are left out. The internal export shows them all.
What about can liners?
The walkthrough has a Can liners section. In our example, 24 round wastebaskets 12 in across and 14 in tall take an 18.85 x 23 in liner (half the circumference, then the height, half the diameter and 3 in of overhang); changed every visit, 5 times a week, they need 120 liners a week, 6,240 a year, 12.48 cases of 500. The overhang and a rectangular can's extra stay your call: the distributors cited do not agree.
What about concentrated chemicals?
The walkthrough has a Concentrates section. Type the label's dilution as water parts: at 1:64, Betco counts 128 / 64 = 2 oz per gallon of water. In our example, 2 gallons of water a visit, 5 times a week, take 0.16 gallon of cleaner (20 oz) a week, 8.13 gallons a year, so 9 one-gallon containers.
What about grout cleaning and sealing?
The floor care survey has a Tile and grout section. In our example, the 30 x 20 ft entrance lobby, less 12 sq ft for the desk, has 588 sq ft of 18 in tile with 3/16 in joints: 776 ft of joint (the area over the tile and its joint, both ways). Two coats of a sealer at 400 sq ft a can take 2.94 cans, and the restrooms, with an aerosol rated at 500 ft of joint a can, add 0.48: the sheet rounds up per product, 3 and 1. The coverages come from the label: Aqua Mix SameDay gives 300 to 500 sq ft a 15 oz can, the TileLab aerosol 525 linear ft. Before the work, the sheet records the grout's condition and the water drop test.
What about move-out and rental turnover cleaning?
Use the move-out and rental turnover cleaning survey. In our Lake George, NY example, a rental cottage: the kitchen, the bathroom, two bedrooms and the living room come to 704 sq ft; with your minutes per room (60 for the kitchen in heavy condition, 25 a bedroom) and 400 sq ft an hour for the living room, the rooms take 3.28 h, and the extra tasks (oven, fridge, 14 doors and drawers, baseboards, 6 windows) 3.42 h: 6.7 h in all. The hole in the drywall and the chipped counter are recorded with photos before the work. At 8 turnovers a month, 3 sheet sets a turnover come to 24 a month, and 12 to own at 4 par (LODGING advises four or five). For a move-out, the sheet records what the lease asks, as written, and takes no position.
Feet or meters?
Both. A new sheet starts in your organization's system, and a switch on the sheet goes from one to the other, converting the measurements.
What about air duct and dryer vent cleaning?
Use the HVAC maintenance visit, on the HVAC page. Its Ducts and registers part records each run and its registers, the inside surface to clean and the condition seen, with no verdict on health; its Dryer vents part records the straight length, the elbows and the equivalent length, to compare with the IRC or the dryer maker's chart. The NBC 2020 (9.32.1.3) asks for a duct that discharges directly outdoors and can be cleaned, and sets no length.
Did this page help you?