For gutter installers and their crews

Every gutter run measured, every hanger and every elbow counted.

Walk the house on your phone: one row per gutter run, with its size and length. MesuPro counts the hangers from your spacing, the downspout elbows and straps, and the roof area per outlet.

No credit card. Cancel anytime.

More templates to try: Gutter cleaning service

Gutters: a MesuPro sheet with calculated values and totals
Gutters: the same sheet on a phone
A real MesuPro sheet: the math and the totals happen as you type.

The gutter templates

Installing or cleaning; feet, inches, square feet or metric: your choice.

Gutter survey⁠

Runs by size, hangers, end caps, corners and outlets, downspouts with elbows and straps, old gutters, gutter guards and heat cables.

You get: Hangers Roof area per outlet Downspout length

Gutter cleaning service⁠

A cleaning contract: each run with its height, guard and debris, the water test, the hours of a visit and of the year.

What you record on site

See the list (10)
  • Each run: its profile, size, material, length and eave height
  • Your hanger spacing, the end caps, corners and outlets
  • The roof area draining to each run
  • Downspouts: size, count, drop height, elbows and discharge
  • The old gutters to remove and fascia repairs
  • Gutter guards: the product, the length to cover and the piece the maker sells
  • Heat cables: the maker and product, the roof edge and the multiplier from its table for this overhang, the gutter and the heated downspouts
  • Rain barrels: the roof area to each downspout, the rain to plan for, the barrels' capacity and count
  • Access (ladder, lift) and your city's downspout rule
  • For a cleaning: the eave height, the guard, what fills each run (leaves, needles, samaras), the SHQ's water test and how each downspout flows

What MesuPro calculates for you

See the list (9)
  • The gutter length by size
  • Hangers for each run, from your spacing
  • End caps, corners and outlets
  • The roof area per outlet, to compare with the sizing tables
  • Downspout length, elbows and straps
  • Gutter guard pieces per product, rounded up once
  • Heat cable length per product, by each maker's own rule
  • The water a downspout can collect, the barrels' storage and the overflow for that rain
  • For a cleaning: the hours of a visit and of the year, from your minutes per 100 ft and per downspout and the visits you plan

No spacing or size comes filled in: they are yours. The sizing references are cited in the template's help; also check your city's rule on where downspouts may discharge.

The report, as PDF or Excel

Export the survey to PDF with your photos for the client, or to Excel to bring the quantities into your quote.

Gutters: first page of the PDF report exported from MesuPro

FAQ

Does MesuPro know my hanger spacing?

No: you enter the spacing you use. The help cites the manufacturers'. The template counts the hangers for each run.

Does the template pick the gutter size?

No: it works out the roof area per outlet, and the help cites the sizing tables to compare it with. The size stays your call.

What about gutter cleaning?

Use the cleaning service template. In our example, a two-storey house in Kalamazoo: 150 ft of gutters and 5 downspouts, at 12 minutes per 100 ft (20 under the pines) and 6 minutes per downspout, come to 0.86 h a visit and 2.1 h a year with two visits, three at the back. The SHQ, Quebec's housing agency, asks at least two cleanings a year, more under trees.

What about heat cables?

Each row names the maker and follows its rule. In our Cincinnati example, the back has 61 ft of roof edge and a 12 in overhang: at WarmlyYours' 3.1, 189.1 ft on the roof, plus 61 ft in the gutter, two 11 ft downspouts and 1 ft for the power connection, 273.1 ft in all. On the garage, Warmup's multiplier (4.0) already covers the gutter: 92 ft plus 18 ft down the downspout and back up, 110 ft, so its 120 ft kit. The circuit and the ground-fault protection stay an electrician's work.

What about gutter guards?

A table of their own, by the piece. In the same example, 131 ft of Amerimax Snap-In in 3 ft pieces is 43.7 pieces, rounded up once to 44: an offcut finishes another run (rounding each run would count 45).

What about the old gutters?

A table of its own for the length and the downspouts to remove, and another for fascia or soffit repairs.

What about a rain barrel?

Use the Rainwater section. In our Cincinnati example, 620 sq ft of roof drains to the back corner downspout: a 1 in storm gives about 386 gal (AgriLife: about 0.62 gal per sq ft per inch), two 55 gal barrels keep 110 and 276 gal overflow, to the flower bed and away from the foundation. It is not drinking water; inside the house it is plumbing.

Try MesuPro on your next job.

Start your 14-day free trial

No credit card. Cancel anytime.

Did this page help you?