Residential painting

Room by room: walls (a whole room on one line), ceilings, trim, doors and cabinets, with gallons and labor hours.

No credit card. Cancel anytime.

Feet and inches or metric: your choice. One switch on the sheet converts every measurement.

Residential painting: a filled-in survey in MesuPro
Residential painting: the same sheet on a phone
A survey made with this template, in the app.

What you measure

The template's tables and their columns, as the app shows them. Calculated columns fill in as you type.

Surface Area Calculations

  • Length
  • Room width (all 4 walls)
  • Height
  • Surface Area calculated
  • Other deductions
  • Doors (count)
  • Area of one door
  • Windows (count)
  • Area of one window
  • Net Paintable Area calculated
  • Primer Coats
  • Paint Coats
  • Area to cover, primer and paint coats calculated
  • Spread Rate (from the can)
  • Paint (gal) calculated
  • Surface TypeChoices: Drywall - Smooth Drywall - Textured Plaster Wood - Interior Wood - Exterior Brick Stucco Metal Previously Painted
  • Prep Work RequiredChoices: Light Cleaning Degrease Patch only (no primer) Patch & spot prime Repair & Prime Wash & Prime Sand & Prime Strip & Prime
  • Area Notes
  • Paint (product, color)
  • Primer (product)
  • Primer Spread Rate (from the can)
  • Primer (gal) calculated
  • Production rate (per coat)
  • Labor hours calculated

Ceiling Area Calculations

  • Room length
  • Room width
  • Ceiling area calculated
  • Other deductions
  • Net Paintable Area calculated
  • Primer Coats
  • Paint Coats
  • Area to cover, primer and paint coats calculated
  • Spread Rate (from the can)
  • Paint (gal) calculated
  • Surface TypeChoices: Drywall - Smooth Drywall - Textured Plaster Wood - Interior Wood - Exterior Brick Stucco Metal Previously Painted
  • Prep Work RequiredChoices: Light Cleaning Degrease Patch only (no primer) Patch & spot prime Repair & Prime Wash & Prime Sand & Prime Strip & Prime
  • Area Notes
  • Paint (product, color)
  • Primer (product)
  • Primer Spread Rate (from the can)
  • Primer (gal) calculated
  • Production rate (per coat)
  • Labor hours calculated

Trim & Linear Measurements

  • Length
  • Trim Width
  • Trim Area calculated
  • Trim TypeChoices: Baseboard Crown Molding Door Trim Window Trim Chair Rail Wainscoting Door (slab) Closet door Railing Fascia / soffit
  • Coats Needed
  • Trim Notes
  • Paint (product, color)
  • Spread Rate (from the can)
  • Paint (gal) calculated
  • Primer (product)
  • Primer Coats
  • Primer Spread Rate (from the can)
  • Primer (gal) calculated
  • Production rate (per coat)
  • Labor hours calculated

Doors and frames

  • Where
  • DoorChoices: Interior door Exterior door Closet or bifold door Hollow metal door Other
  • Doors (each)
  • Door width
  • Door height
  • Sides painted
  • Door area calculated
  • Frames (each)
  • Area of one frame
  • Frame area calculated
  • Doors and frames to paint calculated
  • Primer Coats
  • Paint Coats
  • Primer Spread Rate (from the can)
  • Spread Rate (from the can)
  • Paint (product, color)
  • Primer (product)
  • Paint (gal) calculated
  • Primer (gal) calculated
  • Minutes per side (per coat)
  • Labor hours calculated
  • Area Notes

Cabinets

  • PieceChoices: Door Drawer front Face frame End panel Other
  • Location
  • Count
  • Width
  • Height
  • Faces painted
  • Openings to deduct
  • Area to paint calculated
  • MaterialChoices: Painted wood Stained or varnished wood Bare wood MDF Melamine or laminate Thermofoil (vinyl wrap) Other
  • Prep Work RequiredChoices: Light Cleaning Degrease Patch only (no primer) Patch & spot prime Repair & Prime Wash & Prime Sand & Prime Strip & Prime
  • Paint (product, color)
  • Paint Coats
  • Spread Rate (from the can)
  • Paint (gal) calculated
  • Primer (product)
  • Primer Coats
  • Primer Spread Rate (from the can)
  • Primer (gal) calculated
  • Cabinet notes

See these tables calculate with your own measurements, no account.

Try this template

More templates: Painting

Commercial painting⁠

Commercial areas with deductions, primer and finish coats, gallons to order and trim costs per linear foot.

Watch the film: an office floor (3 min 32 s)All demos

You get: Net Paintable Area Area to cover, primer and finish coats Primer Gallons Needed

Exterior painting and staining survey⁠

Elevation by elevation: walls and gables, trim, soffits, doors and shutters, decks and fences to stain, gallons per product.

You get: Area to paint Paint Trim area

Wallpaper: installation survey⁠

Wall by wall: the drops, the drop length rounded up to the pattern repeat, the drops per roll and the rolls per wallpaper.

You get: Wall area Rolls

About this template

Measure walls, ceilings, trim and cabinets room by room, with deductions, coats, coverage and gallons of paint.

Guide and sources

Read the guide and sources

Rooms: one block per room, named by its room name, with a tab each for its walls, its ceiling, its trim and its doors and frames. "Add a room" starts the next one blank; its walls take the room's ceiling height and paint. Each room shows its gallons per product across its tabs, and the section the whole house's.

Walls: measure each wall's length and height in feet. Count the doors and windows and type their size: a standard door is about 21 sq ft, a window about 15 sq ft.

Ceilings: measure the room's length and width; a ceiling's area is the room's floor area. Trim: measure its length, with its face width in inches.

Gallons come from the area, the number of coats and the spread rate on the product's data sheet. Data sheet rates are measured on smooth, primed walls, without losses: plan about 15% more by brush and roller, more by spray or on texture. The gallons are therefore approximate: real use also varies with the surface's porosity, the color change and the application method.

New drywall usually takes one primer and two finish coats (MPI premium grade); a deep color may need a third.

Homes built before 1978 in the US, or before 1960 in Canada (1960 to 1990 possibly): test for lead before sanding or scraping, and note it in the job form.

Cabinets: one row per kind and size of piece. Count the doors (both faces when their backs are painted), the drawer fronts, the face frames (their run's length and height, less the openings) and the end panels, and type their width and height in inches. Gallons come from the area, the coats and the spread rate on the coating's data sheet: cabinet enamels print about 350 to 500 sq ft per gallon per coat, before losses. Laminate, melamine and thermofoil follow that data sheet: some coatings want a bonding primer, others a scuff sand and a test spot. Drying differs a lot: recoat from 1 to 16 hours and full cure from 5 days to 2 weeks, depending on the product, so plan when the doors go back and when the kitchen can be used. In a house built before 1978 (US) sanding cabinets disturbs more than 6 sq ft per room: lead-safe work under the EPA RRP rule unless a certified renovator's test kit or a lab finds no lead paint on the pieces; in Canada, see the job form's lead line.

Bathroom vanities have their own subsection in the Cabinets section, with the same table.

Doors and frames: a tab beside the trim. Count the doors each with their size and the sides painted, the frames apart with an area each (no paint maker prints one: the frame's length times its girth, at least 1 ft wide, PCA P10). Their gallons show per product in the tab's own columns. The doors deducted from a wall stay in the wall's own door count.

Sources

  • Behr, paint quantity guide Rule of thumbBehr, How much exterior paint to buy, Behr, online guide. Checked Nov 11, 2026
  • PCA P10 Trade associationPCA P10, Measurement of Surface Area for Estimating Painting and Decorating Work, Painting Contractors Association (PCA), PCA Industry Standards, 2023-09-18, pp. 49 to 51. Checked Oct 31, 2026
  • MPI 09 91 23 Trade associationMPI Architectural Painting Manual, guide specification 09 91 23 Interior Painting, Master Painters Institute (MPI), Rev. April 2022. Checked Oct 7, 2026
  • Benjamin Moore, 253 Manufacturer dataBenjamin Moore Super Spec Latex Enamel Undercoater and Primer Sealer 253, technical data sheet, Benjamin Moore, 2018-06-18. Checked Oct 7, 2026
  • Sherwin-Williams, ProMar 200 primer Manufacturer dataSherwin-Williams ProMar 200 Zero VOC Interior Latex Primer, product data sheet, Sherwin-Williams, 108.24A (2/2025). Checked Nov 12, 2026
  • Zinsser, Bulls Eye 1-2-3 Manufacturer dataZinsser Bulls Eye 1-2-3 primer, technical data sheet, Rust-Oleum (Zinsser), BEY123-01. Checked Oct 7, 2026
  • Sherwin-Williams, Pro Industrial DTM Manufacturer dataPro Industrial DTM Acrylic Semi-Gloss, B66-1150 series, product data sheet 113.07A, Sherwin-Williams, 10/2022. Checked Oct 31, 2026
  • Benjamin Moore, Ultra Spec HP DTM Manufacturer dataUltra Spec HP D.T.M. Acrylic Semi-Gloss (FP29), technical data sheet, Benjamin Moore, Canadian data sheet. Checked Oct 31, 2026
  • CompositePaint, estimating method Rule of thumbCompositePaint, How to Estimate a Paint Job: The Working Method, CompositePaint, online guide, updated 2026-08-07. Checked Nov 20, 2026
  • NAVFAC P-710.0, Paint Handbook (EPS) GovernmentEngineered Performance Standards, Real Property Maintenance Activities: Paint Handbook, Departments of the Army, the Navy and the Air Force (US), NAVFAC P-710.0, TB 420-18, AFM 85-49, October 1990, task time details pp. 21 to 26. Checked Nov 20, 2026
  • Benjamin Moore, F547 Manufacturer dataBenjamin Moore Regal Select Interior Flat F547, product specifications, Benjamin Moore, en-ca product page. Checked Nov 11, 2026
  • Benjamin Moore, Advance K792 Manufacturer dataBenjamin Moore Advance Waterborne Interior Alkyd K792 (pearl), technical data sheet, Benjamin Moore & Co., Ltd. K792 CE 041023. Checked Nov 11, 2026
  • Insl-x, Cabinet Coat Manufacturer dataInsl-x Cabinet Coat, émail pour moulures et armoires, fini satin CC-45XX, fiche technique, Benjamin Moore & Co. (Insl-x), CC-45XX FR 041917. Checked Oct 14, 2026
  • Sherwin-Williams, Extreme Bond primer Manufacturer dataSherwin-Williams Extreme Bond Interior-Exterior Bonding Primer, product data sheet, Sherwin-Williams, 108.51A (10/2023). Checked Oct 14, 2026
  • EPA RRP, 40 CFR 745 GovernmentLead Renovation, Repair and Painting rule, 40 CFR 745 subpart E, US Environmental Protection Agency, current CFR. Checked Oct 7, 2026
  • Behr, cabinet and trim enamel 7520 Manufacturer dataBehr Premium Cabinet, Door and Trim Interior/Exterior Satin Enamel No. 7520, product information, Behr, product page read 2026-10-14. Checked Oct 14, 2026
  • Sherwin-Williams, Emerald Urethane Manufacturer dataSherwin-Williams Emerald Urethane Trim Enamel, satin, product data sheet, Sherwin-Williams, 101.010SAD (03/2026). Checked Oct 14, 2026
  • Insl-x, Stix bonding primer Manufacturer dataInsl-x Stix Waterborne Bonding Primer SXA-110, technical data sheet, Benjamin Moore & Co. (Insl-x), SXA-110 US 111225. Checked Oct 14, 2026
  • MPI repainting, DSD Trade associationMPI Maintenance Repainting Manual, guide specification Interior Repainting, Master Painters Institute (MPI), Rev. August 2024. Checked Oct 7, 2026
  • PCA standards (P14) Trade associationPCA Industry Standards (P1 to P25), Painting Contractors Association (PCA, formerly PDCA), 2023-09-18. Checked Oct 7, 2026
  • Sico, data sheet 861-113 Manufacturer dataFiche technique Sico Évolution 861-113, Sico (PPG Canada), 2016-06-10. Checked Oct 7, 2026
  • Dulux, data sheet 41220 Manufacturer dataFiche technique Dulux Diamant Distinction 41220 (perle), Dulux (PPG Canada), online data sheet. Checked Oct 7, 2026
  • Sico, 366-5XX Manufacturer dataSico Interior/Exterior Paint 366-5XX, satin, technical data sheet, The Pittsburgh Paints Company (Sico), 02/2025. Checked Oct 14, 2026
  • Health Canada, lead paint GovernmentHealth Canada, Lead-based paint, Health Canada, modified 2026-10-02. Checked Oct 7, 2026

Your trade isn't listed? The AI assistant builds your form.

No credit card. Cancel anytime.