How to measure walls for paint
Measure each wall, take out what does not get painted, then work out the area to cover and the gallons to buy. A worked example and a free calculator are at the end.
What to bring
- A tape measure or a laser measure
- The spread rates printed on the paint and primer cans (sq ft per gallon)
- Something to note each wall: paper, or a MesuPro sheet on your phone
Step by step
Go around the room wall by wall
Note each wall on its own line: its length along the floor and its height from floor to ceiling. Two walls of the same size each get their own line, so none is missed.
Measure the doors and windows
For each opening that does not get painted, multiply its width by its height: a 3 x 7 ft door is 21 sq ft. Add them up per wall: those are the wall's deductions.
Choose the coats
Count the primer coats and paint coats the job needs. The template starts at 1 primer coat and 2 paint coats; change them to fit the surface.
Read the spread rate on the can
The can says how many square feet one gallon covers. The template starts at 400 sq ft per gallon (9.8 m² per liter), the low end the makers' data sheets print, before losses; use your product's number. Do the same for the primer: the template starts at 350 sq ft per gallon (8.6 m² per liter), the lowest of the primer data sheets cited.
Work out the gallons
The area to cover counts every coat, primer included; the gallons are for the paint coats, added up for all the walls, then rounded up to the next gallon.
The calculation
Net area = length x height, minus deductions, never below 0 for a wall. Area to cover = net area x (primer coats + paint coats). Primer gallons = net area x primer coats / primer spread rate, and paint gallons = net area x paint coats / paint spread rate, each rounded up. By default, as in the template: 1 primer coat at 350 sq ft per gallon (8.6 m² per liter), the lowest of the primer data sheets cited, and 2 paint coats at 400 sq ft per gallon (9.8 m² per liter), the low end the paint data sheets print, before losses.
Worked example
A room of 4 walls, 14, 12, 14 and 12 ft long and 8 ft high, with a 3 x 7 ft door (21 sq ft) and a 3 x 5 ft window (15 sq ft), 1 primer coat at 350 sq ft per gallon and 2 paint coats at 400 sq ft per gallon: net area 380 sq ft, 1,140 sq ft to cover with all coats, so 2 gallons of primer and 2 gallons of paint.
Common mistakes
- Leaving out a wall hidden behind furniture or an open door.
- Forgetting the doors and windows, or measuring them in inches and adding them as feet.
- Using the spread rate of another product: read it on the can you will buy.
- Rounding each wall up instead of the total: add the walls, then round up the gallons.
Painting: from the walls to the gallons
The whole job in MesuPro
Residential painting
Room by room: walls (a whole room on one line), ceilings, trim, doors and cabinets, with gallons and labor hours.
You get: Net Paintable Area Area to cover, primer and paint coats Paint
Your trade isn't listed? The AI assistant builds your form.
Start your 14-day free trialNo credit card. Cancel anytime.