All site survey templates
Each template is a ready-made job form with its calculations. Try one with no account, or start your 14-day free trial with the one that fits your work.
Painting
Residential painting
Walls, ceilings, trim and exterior siding, room by room, with deductions, coats and coverage.
Feet and inches by default
Start with this template Try it, no accountCommercial painting
Commercial areas with deductions, primer and finish coats, gallons to order and trim costs per linear foot.
Feet and inches by default
Start with this template Try it, no accountWindows and window film
Windows: commercial building survey
One section per facade, one row per opening: glazed area and perimeter, per facade and for the building.
Feet and inches by default
Start with this template Try it, no accountCommercial window film
Film for multi-story buildings, floor by floor: glass area, tint and linear elements.
Feet and inches by default
Start with this template Try it, no accountCaulking
Facade joint survey (ft)
Lengths in feet, joints in inches, volume in gallons and 10.1 oz cartridges, facade by facade.
Feet and inches by default
Start with this template Try it, no accountFacade joint survey (m)
Lengths in meters, joints in millimeters, volume in liters and 300 ml cartridges, facade by facade.
Metric units by default
Start with this template Try it, no accountRoofing
Roofing: inspection & measurement
Face by face: area, pitch, material, condition, waste and squares, with photos.
Feet and inches by default
Start with this template Try it, no accountRoofing: measurement and materials
Real sloped area from the pitch, squares, shingles, underlayment, ridge cap and drip edge.
Feet and inches by default
Start with this template Try it, no accountFlooring
Flooring: room measurement
Room by room: area, floor type, waste and area to order.
Feet and inches by default
Start with this template Try it, no accountFlooring and painting: whole house
Floor by floor: flooring with waste, boxes, walls, baseboards and paint.
Feet and inches by default
Start with this template Try it, no accountHVAC
HVAC: load & duct survey
Room areas and loads (BTU, tonnage), duct runs and equipment, with costs.
Feet and inches by default
Start with this template Try it, no accountConstruction
Construction: site measurements
Foundation, floors, walls and roof: concrete to order, net areas, roof squares and shingle bundles, lengths.
Feet and inches by default
Start with this template Try it, no accountConstruction: materials & costs
The same measurements with a unit price on each line and crew hours: material costs, labor costs and one estimate total.
Feet and inches by default
Start with this template Try it, no accountLandscaping
Hardscaping: patios & walkways
Patios, walkways and walls: material with waste, base stone in tons, polymeric sand, geotextile and excavation.
Feet and inches by default
Start with this template Try it, no accountLandscaping: planting
Beds, hedges and amendments: number of plants, mulch and soil volumes.
Feet and inches by default
Start with this template Try it, no accountLawn care
Lawns and edges: areas, condition, frequency and estimated mowing time.
Feet and inches by default
Start with this template Try it, no accountTree & shrub pruning
Trees and hedges: dimensions, pruning type, brush volume and labor time.
Feet and inches by default
Start with this template Try it, no accountIrrigation systems
Irrigation zones, pipes and tanks: flows, water use and trench volume.
Feet and inches by default
Start with this template Try it, no accountLandscaping: general maintenance
Grounds upkeep: areas, tasks, frequency, time and waste volume.
Feet and inches by default
Start with this template Try it, no accountYour trade isn't listed? The AI assistant builds your form.
Start your 14-day free trialNo credit card. Cancel anytime.