Every gutter run measured, every hanger and every elbow counted.
Walk the house on your phone: one row per gutter run, with its size and length. MesuPro counts the hangers from your spacing, the downspout elbows and straps, and the roof area per outlet.
No credit card. Cancel anytime.
What you record on site
- Each run: its profile, size, material, length and eave height
- Your hanger spacing, the end caps, corners and outlets
- The roof area draining to each run
- Downspouts: size, count, drop height, elbows and discharge
- The old gutters to remove, gutter guards and fascia repairs
- Access (ladder, lift) and your city's downspout rule
What MesuPro calculates for you
- The gutter length by size
- Hangers for each run, from your spacing
- End caps, corners and outlets
- The roof area per outlet, to compare with the sizing tables
- Downspout length, elbows and straps
No spacing or size comes filled in: they are yours. The sizing references are cited in the template's help; also check your city's rule on where downspouts may discharge.
The gutter survey template
In feet and inches.
Gutter survey
Runs by size, hangers, end caps, corners and outlets, downspouts with elbows and straps, old gutters to remove.
Feet and inches by default
Start with this template Try it, no accountThe report, ready to send
Export the survey to PDF with your photos for the client, or to Excel to bring the quantities into your quote.
FAQ
Does MesuPro know my hanger spacing?
No: you enter the spacing you use. The help cites the manufacturers'. The template counts the hangers for each run.
Does the template pick the gutter size?
No: it works out the roof area per outlet, and the help cites the sizing tables to compare it with. The size stays your call.
What about the old gutters?
A table of its own for the length and the downspouts to remove, and another for gutter guards and fascia or soffit repairs.