Roofing: measurement and materials
Real sloped area from the pitch, squares, shingles, underlayment, ridge cap and drip edge.
No credit card. Cancel anytime.
Feet and inches by default, metric available for each table.
What you measure
The template's tables and their columns, as the app shows them. Calculated columns fill in as you type.
Roof faces
- Face
- Width (along the eave)
- Length, horizontal (plan view)
- OR length along the slope (measured on the roof)
- Pitch (X in 12)
- Pitch factor calculated
- Real area (sloped) calculated
- Waste
- Area with waste calculated
- Squares (100 sq ft) calculated
- Shingle bundles (3 per square) calculated
- Underlayment roll coverage
- Underlayment rolls calculated
- Notes
Roof lines
- Line
- Ridge and hips (length)
- Ridge cap bundle coverage
- Ridge cap bundles calculated
- Drip edge and rake trim (perimeter)
- Drip edge pieces (10 ft) calculated
- Notes
About this template
Measure each roof face in plan view or along the slope, enter the pitch in 12, and get the real area, waste, squares, shingle bundles, underlayment rolls, ridge cap bundles and drip edge pieces.
More templates: Roofing
Roofing: inspection & measurement
Face by face: area, pitch, material, condition, waste and squares, with photos.
Feet and inches by default
Start with this template Try it, no accountYour trade isn't listed? The AI assistant builds your form.
Start your 14-day free trialNo credit card. Cancel anytime.