Roofing: inspection & measurement
Face by face: area, pitch, material, condition, waste and squares, with photos.
No credit card. Cancel anytime.
Feet and inches by default, metric available for each table.
What you measure
The template's tables and their columns, as the app shows them. Calculated columns fill in as you type.
Roof planes
- Roof plane
- Rafter length (eave to ridge)
- Horizontal run (plan view, instead of the rafter length)
- Width along the eave
- Narrowing at the ridge (trapezoid, or the full width for a hip end)
- Pitch (X/12)
- Pitch factor calculated
- Area calculated
- Pitch rangeChoices: Flat (0-2/12) Low (3/12-4/12) Conventional (5/12-7/12) Steep (8/12-12/12) Very steep (12/12+)
- MaterialChoices: 3-tab shingles (traditional) Architectural shingles (laminated) Asphalt shingles Metal Modified bitumen (SBS) EPDM membrane TPO membrane Membrane (EPDM/TPO) Built-up (tar and gravel) Cedar shakes Slate Other
- WorkChoices: Replace Repair No work Not in scope
- ConditionChoices: Good Fair Poor End of life Replace
- Waste (gable 10, hip 15, cut-up 18-20)
- Area with waste calculated
- Squares (100 sq ft) calculated
- Bundles (3 per square) calculated
- Notes
Roof lines
- Line
- Ridge and hips (length)
- Ridge cap bundle coverage
- Ridge cap bundles calculated
- Drip edge and rake trim (perimeter)
- Drip edge pieces (10 ft) calculated
- Valleys (length)
- Wall and step flashing (length)
- Notes
Penetrations
- Location
- Plumbing vent boots
- Roof vents
- Chimneys
- Skylights
- Exhaust fan vents
- Notes
About this template
Measure each roof plane along the slope or in plan view with its pitch, record material, condition and work, and get the area with waste, the squares and the shingle bundles to order, plus roof lines and penetrations. Waste covers the field shingles: starter and ridge cap come from the roof lines.
More templates: Roofing
Roofing: measurement and materials
Real sloped area from the pitch, squares, shingles, underlayment, ridge cap and drip edge.
Feet and inches by default
Start with this template Try it, no accountYour trade isn't listed? The AI assistant builds your form.
Start your 14-day free trialNo credit card. Cancel anytime.